November 22, 2026 — 1:47 pm

Patio Heater: The Ultimate Buying Guide UK Types, Sizes, Running Costs, Expert Picks & Smart Buying Tips

Patio Heater: The Ultimate Buying Guide UK Types, Sizes, Running Costs, Expert Picks & Smart Buying Tips

A patio heater can make a British garden usable when summer evenings turn cool. UK buyers can choose electric infrared, freestanding gas, tabletop, wall-mounted, and hanging designs. The right option depends on your seating area, exposure, power supply, and expected running cost.

Quick answer: Electric infrared heating suits most small or medium UK seating areas because it provides fast, directed warmth. Gas models offer greater output and mobility for larger open spaces. Before buying, check the heat zone, weather rating, installation position, safety features, and real hourly energy cost.

Patio heater typeTypical outputBest suited toMain trade-off
Electric infrared1.5–2.5kWSmall and medium seating zonesNeeds a suitable power supply
Wall-mounted electric1.5–3kWCovered patios and pergolasPosition must be planned carefully.
Hanging electric1.5–2.5kWTables beneath suitable coversRequires secure overhead mounting
Freestanding electric1.5–2.5kWFlexible domestic useTakes floor space
Freestanding gasOften 10–13 kWLarger, open entertaining areasFuel storage and higher running costs
Tabletop modelsUsually lower outputSmall groups and compact spacesLimited heat coverage

Electric, Gas, or Infrared: Which Type Fits Your Garden?

Electric infrared models are a practical starting point for many UK homes. They direct radiant heat towards people and nearby surfaces instead of trying to warm all surrounding air. They also reach useful heat quickly and avoid storing an LPG cylinder.

Gas models produce much higher headline outputs and do not depend on a nearby mains socket. That flexibility can help on larger patios or exposed seating areas. Their disadvantages include fuel storage, cylinder changes, larger footprints, and combustion safety requirements.

“Infrared” describes how heat is delivered, not the fuel source. Most domestic infrared outdoor heaters run on electricity. This makes the real comparison electric infrared versus gas combustion, not electric versus infrared.

Electric Infrared: Best for Most Everyday Garden Seating

Electric models work well when you usually heat two to six people around a defined seating area. Radiant warmth is especially useful because outdoor air constantly moves. Positioning matters as much as wattage, since poorly aimed heat can miss the people using the space.

Wall-mounted units keep the floor clear and can suit sheltered terraces or pergolas. Freestanding designs provide more flexibility when furniture moves during the year. Hanging models can work above tables where the manufacturer permits that mounting arrangement.

Advantages

  • Fast heat without waiting for a burner to warm up.
  • No gas cylinder to buy, transport, or exchange.
  • Directional heat can focus energy on occupied seating.
  • Wall and ceiling designs save valuable floor space.
  • Many models offer several output settings.

Disadvantages

  • You need a suitable electrical supply.
  • Cable length can restrict positioning.
  • One heater may not cover a wide dining arrangement.
  • Outdoor suitability varies between products.
  • Fixed models need careful placement before installation.

For a more comfortable evening setup, heating can work alongside thoughtful lighting. Thinkvista’s UK fairy lights buying guide covers outdoor power options, placement, and weather considerations. Use lighting for atmosphere rather than treating it as a substitute for functional heat.

Gas Heating: Better for High Output and Flexible Placement

A freestanding gas model can suit larger gatherings where strong output matters more than compact dimensions. Most designs keep an LPG cylinder inside the base and radiate warmth around the burner. Wheels are common because a full cylinder makes the appliance heavy.

Gas also removes the need to route an electrical cable across the garden. This can help where seating sits far from a suitable outdoor socket. You must still allow the clearances, ventilation, and operating space the manufacturer specifies.

Advantages

  • High heat output for larger outdoor areas.
  • No mains cable limits the location.
  • Easy to reposition when the design has wheels.
  • Suitable for settings with poor electrical access.

Disadvantages

  • LPG refills create an ongoing operating cost.
  • Cylinders need appropriate outdoor storage.
  • Units are usually larger and heavier.
  • Fuel-burning appliances require good ventilation.
  • Open flames and hot surfaces need extra care.

Fuel-burning equipment can create carbon monoxide when combustion occurs without enough oxygen. UK government guidance links CO risks with incorrectly used or poorly ventilated fuel-burning appliances. Never move gas equipment designed for outdoor use into an enclosed room for extra warmth.

Running Costs in the UK in 2026

Electricity costs are straightforward because wattage gives you a useful hourly estimate. Multiply the heater’s kilowatts by your electricity price per kilowatt-hour. Your personal tariff may differ, so use the figure shown on your latest bill.

From 1 July to 30 September 2026, Ofgem lists average capped electricity at 26.11 p/kWh for Direct Debit default tariffs. That rate applies across England, Scotland, and Wales, not Northern Ireland. From 1 October 2026, the published average becomes 26.32p/kWh.

Electric outputApproximate hourly energy cost at 26.11p/kWh
1.5kW39p
2.0kW52p
2.5kW65p

These examples show energy consumed while the heater operates continuously at full output. Lower settings reduce consumption when a model genuinely lowers electrical demand. The normal household standing charge is not added because you pay it regardless of this appliance.

Gas costs depend on the refill price and the appliance’s fuel consumption. Calor currently lists a 13kg Patio Gas refill at £52.50, with a temporary volatility surcharge shown separately. Check the heater’s kilograms-per-hour or grams-per-hour specification before estimating how long one cylinder should last.

The useful comparison is cost per occupied hour rather than maximum output alone. A powerful appliance wasting heat beyond the seating area may cost more without improving comfort. Heating a smaller zone accurately is often more sensible than trying to warm an entire garden.

How to Choose a Patio Heater for a UK Garden

Start by measuring the seating zone, not the entire patio. Outdoor radiant heating works best when warmth reaches the people who need it. A wide table may benefit from two smaller heat sources instead of one unit aimed at the center.

Next, consider how exposed the seating is to wind. A sheltered corner normally needs less output than an open terrace with moving air. Screens, fences, planting, and covered structures can all change how warm the same heater feels.

Use these seven buying checks before ordering:

  1. Seating zone: Measure the area people occupy during normal use.
  2. Power source: Decide whether a safe outdoor electricity supply is available.
  3. Output: Match wattage or gas output to the occupied zone and exposure.
  4. Mounting: Choose freestanding, wall-mounted, hanging, or tabletop placement.
  5. Controls: Look for useful heat settings rather than paying for unused features.
  6. Weather protection: Check the manufacturer’s outdoor-use statement and IP information.
  7. Safety features: Review tip-over protection, mounting clearances, guarding, and shutdown controls.

Garden layout also affects whether the chosen position remains practical year-round. Thinkvista’s Home Improvement section includes related outdoor and household planning guides. Planning heat, lighting, access, and storage together can prevent awkward changes later.

Outdoor Electrical Safety and Weather Protection

Outdoor Electrical Safety and Weather Protection

Do not assume every electrically powered outdoor product can sit permanently in heavy rain. Check the manufacturer’s stated weather protection and intended installation position. A covered wall-mounted model can have different exposure requirements from a unit designed for an open terrace.

Electrical Safety First advises that outdoor sockets should resist water exposure and have suitable RCD protection. Its guidance states IP44 protection for splash exposure, with higher ratings appropriate where water exposure increases. It also advises choosing a cable long enough to reach the supply without relying on an extension lead.

Keep the appliance on a stable surface when using a freestanding design. Leave the manufacturer’s required clearance around furniture, parasols, plants, fencing, and other combustible materials. Never move equipment while it is operating or before hot surfaces have cooled.

Inspect cables, plugs, heating elements, guards, gas hoses, and connectors before seasonal use. Remove dirt and debris according to the product instructions. Stop using equipment showing damaged electrical parts, unstable fittings, leaking connections, or unusual operation.

Think About the Whole Patio, Not Only the Heater

Heating works better when the seating layout supports it. Place chairs inside the useful radiant zone instead of expecting warmth to travel across unused floor space. Moving a table by half a meter can sometimes improve comfort without increasing power.

Patio maintenance also deserves attention because dry debris should stay away from hot equipment. Thinkvista’s weed burner guide for UK gardens covers patio surfaces, combustible materials, and heat-related garden precautions. Its 2026 home maintenance checklist also provides broader seasonal outdoor maintenance ideas.

Storage can extend the useful life of movable equipment. Follow the manufacturer’s instructions for covers, winter storage, and cylinder handling. Do not wrap or store equipment until every heated surface has cooled completely.

Our Verdict: Which Type Should Most UK Buyers Choose?

For most households with a suitable electrical supply, an electric infrared model is the strongest starting point. It offers simple operation, focused heat, and predictable electricity costs. Choose its position carefully because useful warmth depends heavily on direction and distance.

A gas model makes more sense when you need greater output or cannot reach the seating area with safe mains power. Its flexibility comes with fuel costs, cylinder management, and stricter ventilation considerations. Buy according to the space you use rather than the biggest output printed on a box.

Before You Buy

Measure your occupied seating area, identify the power source, and check how exposed the space becomes after sunset. Then compare output, controls, installation, weather protection, and hourly energy use. Those checks help you choose better than relying on wattage or looks alone.

Frequently Asked Questions

How much does a patio heater cost to run?

A 2kW electric model costs about 52p per hour at the current 26.11p/kWh Ofgem average rate. Your actual cost depends on your tariff and selected heat setting. Gas costs vary with the cylinder price and the appliance’s fuel-consumption rate.

Is gas or electric better for a UK garden?

Electric infrared usually suits smaller or medium domestic seating areas with nearby power. Gas provides greater headline output and works without a mains cable. Your garden size, exposure, seating position, and fuel-handling preferences should decide which you choose.

Can an outdoor heater stay outside all year?

That depends on the exact model and its manufacturer’s instructions. Check the stated weather resistance rather than assuming every outdoor product tolerates permanent rain exposure. A protective cover or dry storage may still be recommended during long periods without use.

What output should I choose?

A compact sheltered seating zone may work with roughly 1.5kW to 2kW of directed electric heat. Larger or more exposed seating can require higher output or several heating positions. Treat manufacturer coverage figures as guidance because wind and mounting position change real-world performance.

Can I use gas heating beneath a covered area?

Only use fuel-burning equipment where its manufacturer specifically allows the planned location. Restricted ventilation can let combustion gases build up and create serious risks. An electric infrared design is often easier to position beneath suitable covered outdoor structures.